GBP (£)
Share this product on social media
Shop SATEL
Certificate of compliance with the EN 50131 requirements for Grade 2 motion detection using passive infrared (PIR) sensor adjustable sensitivity of detection digital motion detection algorithm
NEW LINE OF PIR AND DUAL-TECH (PIR + MW) DETECTORS
One enclosure, many devices
Elegant, slim enclosure is made of high quality plastic. Uniform appearance of all detectors installed in the premises makes it difficult for an intruder to identify the specific model used in the system because all of them look the same.
SLIM-PIR · SLIM-PIR-PET · SLIM-PIR-LUNA · SLIM-PIR-LUNA-PET · SLIM-PIR-PRO
SLIM-DUAL · SLIM-DUAL-PET · SLIM-DUAL-LUNA · SLIM-DUAL-LUNA-PET · SLIM-DUAL-PRO
Reliable motion detection
A unique lens
Each detector comes with a modern lens designed and manufactured in Japan – specially for SATEL. It provides a very large detection area with dimensions up to 20 m x 24 m and 90° viewing angle.
Japanese optics 
coverage area 20x24m 
detection angle 90°Many years of experience in the production of motion detectors and the use of the latest technologies made it possible to develop an advanced new generation algorithm of motion detection. Because of it, SLIM LINE detectors ensure reliable detection of intruders throughout the entire monitored area, without triggering unwanted alarms.
SLIM LINE detectors dynamically adjust the motion detection algorithm to changes in ambient temperature, so these changes do not affect the effectiveness of the detectors.
As you can easily replace the complete front part with the lens, the SLIM LINE detectors* can be quickly and conveniently customized to suit the needs of the premises, e.g. to the shape of protected room. The wide-angle (WD) lenses are fitted as standard, but curtain (CT) and long-range (LR) lenses are also optionally available.
* except for PET detectors
DUAL – two detection
paths:
PIR and MW
Dual technology detectors, in addition to the infrared (PIR) detector,
are also fitted with a microwave sensor (MW), which obviously enhances
their immunity to unwanted alarms caused by rapid temperature changes
in the protected room or movements of air masses within the coverage area.
Creep zone protection
An integrated tilting mirror used in the LUNA* and PRO models enables effective monitoring of the so-called creep zone, i.e. the area directly under the detector.
* except for PET detectors
Signaling covering attempts
The SLIM LINE detectors in the PRO version come with the function of active anti-masking using infrared radiation. Therefore, any attempts to disable them, for example, by covering the lens with adhesive tape or spraying paint or clear varnish on it, can be signaled.See a presentation of SLIM LINE detectors
Quick and easy installation
You can open the enclosure with a flat tip screwdriver, while no tools are required to close it.
Plug-in terminal block
The LUNA and PRO versions come with a plug-in terminal block. When removing the electronics board, you do not have to unscrew the wire terminals. It also allows you to quickly change the detector model.
Built-in EOL resistors
All SLIM LINE detectors have built-in end-of-line resistors designed for work with SATEL control panels (1.1 kΩ). The LUNA and PRO models are additionally provided with resistors for faster installation in systems based on other types of control panels (4.7 kΩ, 5.6 kΩ).
Adjustable wall and ceiling mounting bracket
Design of the SLIM LINE detectors allows installation directly on a flat surface. If the detector needs to be mounted at a different angle for optimal adjustment of the protected area to the room, you can use the BRACKET D mount. Thus you can adjust the detector tilt angle in two planes: up to 35° vertically and up to 90° horizontally. To meet the EN 50131 requirements for Grade 3, the PRO model bracket is provided with a tamper switch.
Two levels of sensitivity
Remote configuration
A very useful feature for the installer, available in the LUNA and PRO models, is the ability to remotely change the detector operating parameters using the OPT-1 keyfob. Thus, the settings (including sensor sensitivity, operating mode, indicator light and LED lighting) can be changed easily, without having to open the detector enclosure each time.
One indicator – many colors
SLIM LINE detectors offer the possibility of choosing the LED indicator color. Depending on the model, there are four or even seven colors available.
If necessary, the LED indicator can be turned off permanently.
- certificate of compliance with the EN 50131 requirements for Grade 2
- motion detection using passive infrared (PIR) sensor
- adjustable sensitivity of detection
- digital motion detection algorithm
- digital temperature compensation
- wide–angle lens, designed specifically for the SLIM LINE detectors
- pet immunity up to 20 kg
- built–in end–of–line resistors (2EOL: 2 x 1.1 kΩ)
- LED indicator selectable color of the LED indicator (4 colors available)
- LED indicator remote enable/disable
- supervision of motion detection and supply voltage circuit
- tamper protection against opening of enclosure
TECHNICAL DATA
Supply voltage 12 V DC
Detected target velocity 0,3...3 m/s
Operating temperature range -10°C...+55°C
Recommended mounting height 2,4 m
Standby mode current consumption 8 mA
Max. current consumption 23 mA
Weight 100 g
Maximum humidity 93±3% Dimensions 62 x 137 x 42 mm
Environmental class according to EN50130-5 II
Alarm signaling time 2 s
Complied with standards EN 50131-1, EN 50131-2-2, EN 50130-4, EN 50130-5
EOL resistors 2 x 1,1 kΩ
Warm-up period 30 s
Security grade according to EN50131-2-2 Grade 2
Detection area 15 m x 20 m, 90° (montaż na 2,4 m)
Alarm outputs (NC relay, resistive load) 40 mA / 24 V DC
Tamper outputs (NC) 100 mA / 30 V DC
Relay contact resistance (alarm output) 26 Ω
Permissible installation height up to 4 m
