GBP (£)
Share this product on social media
Shop TP-Link
TL-SG1006PP 6-Port Gigabit PoE+ Unmanaged Network Switch. Perfect for small office and home use, it features 4 PoE+ ports, high-speed data tran
TL-SG1006PP is an unmanaged switch with 6 Gigabit ports that requires no configuration and provides
4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE
802.3af/at/bt compliant Powered Devices (PDs) at port 1 and IEEE 802.3af/at compliant Powered
Devices (PDs) at port 2-4. In this situation, the electrical power is transmitted along with data in one
single cable allowing you to expand your network to where there are no power lines or outlets, where
you wish to fix devices such as APs, IP Cameras or IP Phones, etc
- Power Over Ethernet
4 RJ45 ports (port 1 to port 4) of the switch support Power over Ethernet (PoE) function. They can
automatically detect and supply power with those IEEE 802.3af/at/bt compliant Powered Devices (PDs)
at port 1 and IEEE 802.3af/at compliant Powered Devices (PDs) at port 2-4
- Overload Arrangement
TL-SG1006PP has the priority function which will help protect the system when the system power is
overloaded. If all PoE PDs power consumption is ≥ 64 W*, a priority will be arranged among the PoE
ports, then the system will cut off the power of the lowest-priority port
- Intelligent Power Management
Priority (port 1 > port 2 > port 3 > port 4): This function will help protect the system when the system
power is overloaded. For example, port 2, 3, and 4 is using 18 W respectively (maximum power per port
is 30 W); the system power is 54 W in total. If there is an additional PD inserted to port 1 with 25 W, and
then the system will cut off the power of port 4 because of the overloaded power, this means port 2
and 3 will use 18 W respectively and port 1 will use 25 W, no power will be supplied to port 4
- Highlight Performance
Up to 250 m PoE power supply and data transmission under Extend Mode** for port 1-2.
With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered devices (PD) for port 1-4. When the switch finds that a PD stops sending data packets to the switch for a long period, the switch will reboot it automatically
| Store-and-forward | Yes | Auto MDI/MDI-X | Yes |
|---|---|---|---|
| Auto-negotiation | Yes | MAC address table | 4000 entries |
| Switching capacity | 12 Gbit/s | Rack mounting | Yes |
| Fanless | Yes | Power supply included | Yes |
| Power over Ethernet (PoE) | Yes | Heat dissipation | 16.2 BTU/h |
| Forwarding rate | 8.928 Mpps | Flow control support | Yes |
| Power source | DC/PoE | Input current | 1.31 A |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T | Cable types supported | Cat3, Cat4, Cat5, Cat5e, Cat6 |
| DC input voltage | 53.5 V | Total Power over Ethernet (PoE) budget | 64 W |
| Stackable | Yes | MAC address auto-learning supported | Yes |
| MAC address auto-aging supported | Yes | Power over Ethernet (PoE) ports quantity | 4 |
| Storage relative humidity (H-H) | 5 - 90% | Operating relative humidity (H-H) | 10 - 90% |
| Operating temperature (T-T) | 0 - 40 °C | Width | 158 mm |
| Depth | 101 mm | Height | 25 mm |
| Package type | Box | Certification | FCC, CE, RoHS |
| LED indicators | Yes | Networking standards | IEEE 802.1p, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x |
| Storage temperature (T-T) | -40 - 70 °C | Product colour | Grey |
| Power consumption (typical) | 4.75 W | Quick start guide | Yes |
| IGMP snooping | Yes | Quality of Service (QoS) support | Yes |
| Power consumption (max) | 71.46 W | Ethernet LAN data rates | 10,100,1000 Mbit/s |
| Switch type | Unmanaged | Basic switching RJ-45 Ethernet ports quantity | 6 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) | 10G support | No |
